How to Locate an Existing Septic Tank

How to Locate an Existing Septic Tank — septic system guidance for Ontario homeowners on Septic Ontario. Compare septic contractors, reviews, and free…

By Septic Ontario. Published .

How to Locate an Existing Septic Tank

The tank is usually downslope from the house, within a few metres of where the main drain leaves the foundation. Lids may sit at grade, under a few centimetres of soil, or under a deck or driveway.

Use records first

A permit drawing or as-built is the fastest map. See how to find septic records in Ontario. Pumping invoices sometimes sketch the lid location.

Look before you dig

  • Follow the sewer line leaving the basement if it is visible
  • Check for round or square concrete or plastic lids, vent pipes, or a depression in the lawn
  • Probe gently with a thin rod only where you are sure there are no buried utilities
  • Call Ontario One Call before any digging so gas, power, and phone lines are marked
  • Do not excavate with a machine to "find" the tank. A pumper locates and opens lids as part of a normal visit and can mark them for next time.

    Book a pumping visit if you need the lids found and the tank emptied.